技術員聯盟提供win764位系統下載,win10,win7,xp,裝機純凈版,64位旗艦版,綠色軟件,免費軟件下載基地!

當前位置:主頁 > 教程 > 服務器類 >

Linux下partprobe命令的使用詳解

來源:技術員聯盟┆發布時間:2018-02-14 06:32┆點擊:

  linux上,在安裝系統之后,可否創建分區并且在不重新啟動機器的情況下系統能夠識別這些分區?

  解決方法:

  你可以使用一個叫做partprobe的工具。它包含在parted的rpm軟件包中。在Red Hat Enterprise Linux 3上他的版本是parted-1.6。 partprobe 是一個可以修改kernel中分區表的工具??梢允筴ernel重新讀取分區表。如下命令可以查看你的系統是否安裝了parted軟件包

  代碼如下:

  rpm -q parted

  舉例來說:

  代碼如下:

  # rpm -q parted

  parted-1.6.3-29

  你可以使用up2date命令安裝這個軟件包,如果在你的系統已經正確地注冊到RHN上了。否則你可以從光盤上安裝這個文件。

  你可以使用fdisk或者其他命令創建一個新的分區,然后使用partprobe命令重新讀取分區表。

  代碼如下:

  # partprobe

  這個命令執行完畢之后不會輸出任何返回信息,你可以使用mke2fs命令在新的分區上創建文件系統。

  在Linux中使用fdisk命令進行分區時,有時會遇到“WARNING: Re-reading the partition table failed with error 16: Device or resource busy.The kernel still uses the old table.The new table will be used at the next reboot.”這種告警信息。如下所示

  代碼如下:

  [root@localhost ~]# fdisk /dev/sde

  The number of cylinders for this disk is set to 18928.

  There is nothing wrong with that, but this is larger than 1024,

  and could in certain setups cause problems with:

  1) software that runs at boot time (e.g., old versions of LILO)

  2) booting and partitioning software from other OSs

  (e.g., DOS FDISK, OS/2 FDISK)

  Command (m for help): p

  Disk /dev/sde: 155.6 GB, 155692564480 bytes

  255 heads, 63 sectors/track, 18928 cylinders

  Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot Start End Blocks Id System

  /dev/sde1 1 18275 146793906 5 Extended

  /dev/sde5 1 18275 146793874+ 83 Linux

  Command (m for help): n

  Command action

  l logical (5 or over)

  p primary partition (1-4)

  p

  Partition number (1-4): 2

  First cylinder (18276-18928, default 18276):

  Using default value 18276

  Last cylinder or +size or +sizeM or +sizeK (18276-18928, default 18928):

  Using default value 18928

  Command (m for help): w

  The partition table has been altered!

  Calling ioctl() to re-read partition table.

  WARNING: Re-reading the partition table failed with error 16: Device or resource busy.

  The kernel still uses the old table.

  The new table will be used at the next reboot.

  Syncing disks.

  此時使用fdisk命令看不到新建的分區信息,可以使用partprobe命令解決這個問題而不用重啟系統,因?yàn)閜artprobe可以使kernel重新讀取分區信息,從而避免重啟系統。

  代碼如下:

  partprobe - inform the OS of partition table changes

  DESCRIPTION

  This manual page documents briefly the partprobe command.

  partprobe is a program that informs the operating system kernel of partition table changes, by requesting that the operating system re-read the partition table.